Pedders have spent many years developing a comprehensive range of bushes for all applications each designed to allow flexibility of movement of the entire suspension while maintaining correct mounting and alignment of individual parts.

They are used to position suspension and steering components such as sway bars, shock absorbers, torsion bars and control arms. In addition bushes help absorb road shock and enhance comfort while some are designed to reduce noise vibration and harshness.

Worn bushes can cause rapid try wear, loose or pulling steering and in some cases effect braking and handling.
Bushes are made from a number of different materials including rubber and polyurethane. By upgrading the original bushes to superior Pedders products which are designed for specific use, a vehicle's general handling and its ability to perform in certain conditions can be dramatically improved.

Other features of Pedders Urethane Bushes are:

• Hardened crush tubes for longer life and to eliminate slippage or creep.
• A double helix, used against the outer diameter of the crush tube. The double helix maintains axial location while allowing full rotationof the pivot. It also acts as a grease reservoir that further increases product
• Knurling. For extra protection against adverse wear in heavily laden bushings.
• Bullet Grooves. These provide the correct pre-load while at the same time accommodating a wide variance in sizes and maintaining free pivoting of the bushings.

 

We supply all pedders products!

For further details, please contact us.